Cowboy Trucker – Western Horseman

0
2

Over-the-road driver Rick Linneman tricked out his truck in Western style as a way to honor the cowboys and makers he reveres.

Rick Linneman has traveled to the National Cowboy & Western Heritage Museum in Oklahoma City, Oklahoma, in his truck named “Cowboy Pride” several times to attend the annual Traditional Cowboy Arts Association Sale & Exhibition.

Truck drivers are unsung heroes of the highway, spending the majority of their lives crisscrossing the country from one point to another with few stops in between. During the COVID-19 pandemic, their dedicated service in the transport of essential food and supplies has become even more apparent and acknowledged. Rick Linneman of Gillette, Wyoming, is one of the veteran truck drivers going down the road, but at the core he’s a cowboy.

Driving a shiny teal Peterbilt 379 he calls “Cowboy Pride,” after an Ian Tyson song, he’s logged more than 1, 700, 000 miles since he bought the truck brand new in 2007 and more than four million miles since he started driving in 1973. Though he’s had several trucks, Cowboy Pride is likely his last, and he wanted to make it special by paying tribute to hard-working cowboys, Western artists and gear makers. Neatly displayed inside the truck is a museum-quality collection of Western art and gear made by a who’s-who of cowboy artisans, including Bill Black, Don Butler, Mark Dahl, Douglas Krause and Todd Hanson.

A pair of leather cuffs from Butler wrap around the arm
rests, one of the last pieces the Wyoming saddlemaker made before his death in
2014. The plate at the base of the gearshift is covered with a black-and-white
cowhide given to him by his saddlemaker brother and a square of leather hand-tooled
with a hackamore horseman by Bob Walden of Montana. A pair of tooled leather
saddlebags by Monte Beckman of Oregon and a leather logbook cover carved by
Andy Stevens of Wyoming lay on the passenger’s seat. A hand-engraved horn cap
Linneman bought from Rick Bean in Idaho is the centerpiece of the steering
wheel, and Nevada engraver Mark Dahl created a cap for the polished wood
gearshift knob. A pair of conchos from Todd Hanson adorn the air-brake buttons.
A half-scale quirt braided by Black hangs from the horn. In the sleeper is a
horsehair mecate made by John Silva tied in an alamar knot and flanked by two
Karmel Timmons art prints. There also is a rawhide reata braided by Jim
McKinney of Nevada.

Rick Linneman named his Peterbilt 379 truck after the Ian Tyson song “Cowboy Pride.”
Linneman named his truck after an Ian Tyson song and to honor cowboys, artists and makers.

Linneman rotates pieces from his vast collection between his
house and home, and he has a story about each piece, its maker and his trips
throughout the West. Although it can be difficult to park a 72-foot long semi
and loaded flatbed trailer in town, Linneman occasionally finds a good spot and
takes a taxi to attend Western events and visit museums. He also meets with his
cowboy and craftsmen friends along the way, who value his friendship and
patronage through the years.   

“I’ve always enjoyed art and gear,” says Linneman. “I’m
honored to have such awesome friends who are so talented; I enjoy each and
every one of them. We have a brotherhood.”

Rick Bean and Mark Dahl made silver pieces for Rick Linneman’s truck.
The steering wheel has a concho from Rick Bean, and TCAA engraver Mark Dahl made the cap on the gearshift knob.

Displaying pieces from his friends not only makes Linneman’s
truck feel like home, but it also keeps him connected to the cowboy lifestyle
he’s loved since he was a kid watching Western movies and reading Will James
books. 

Linneman was born in Douglas, Wyoming, but his family moved
around Wyoming throughout his childhood. He always thought of Powell, Wyoming,
as his home.

“We moved there when I was in eighth grade and that’s where
I really blossomed,” he recalls. “My dad was a truck driver and we lived in
town, but there was a livestock auction yard nearby and I’d go there and look
at the horses and cows. The owner became like a grandpa to me and taught me a
lot. He gave me a job before I was old enough to legally work, and I stayed
until I graduated from high school.”

Rick Linneman’s truck has a drawing from Larry Butte, a rawhide reata, a quirt and a horsehair tassle.
A drawing from Larry Butte a section of a rawhide reata, an intricately braided quirt and horsehair tassle hang in the sleeper.

With the money he earned, Linneman bought a horse and tack, and he also joined FFA to learn about horses, livestock and agronomy in hopes of one day working on a ranch.

“If I wanted something I worked hard to earn money to buy
it,” he says. “My parents told me we couldn’t afford to get me a horse, so I
bought my own and kept it a secret from them for six months. I didn’t ask for
handouts; I paid for everything.”

After high school, Linneman worked for a sheep farm and cowboyed
before becoming a truck driver. However, he really wanted to go to Nevada and buckaroo.

Rancher Bob Walden of Montana carved a leather piece for Rick Linneman’s truck.
Rancher Bob Walden of Montana carved this hackamore horseman for Linneman’s truck.

“I’d seen all of the silver bits and spurs and read about
the buckaroos [in Nevada] and wanted to go out there,” he says. “I wanted to
earn enough money to get a horse trailer and head West, but I didn’t make it.”

During his 47 years of driving, Linneman did take a few
hiatuses to do other jobs, such as manage a ranch for the Murphin family in
Wichita, Kansas, who raised and showed Quarter Horses. He also got married and
raised his son, Shawn, who works on a ranch south of Gillette, Wyoming, and has
two children who are both interested in riding horses.

Though Linneman rarely gets to ride, he does have a
13-year-old Paint Horse he calls “Jake.” Lonnie and Julie Lorton in Galeton,
Colorado, cared for the horse while Linneman was on the road, and Julie showed
the gelding in Western dressage. Today, Shawn keeps the horse on the ranch for
his family to ride.

Rick Linneman collects California-style gear and art.
Linneman enjoys California-style gear and horsemanship as seen in his mecate tied in an alamar knot and two prints by artist Karmel Timmons.

While he’s driving, Linneman can’t help but think of the
old-time cowboys and teamsters who transported freight in horse-drawn wagons or
plowed fields with horse-drawn combines like his grandfather. Cowboying and
truck driving have some similarities in that the cowboy and driver are both
moving a product and often work solo. Both also take pride in their equipment
and heritage.

“Out here you’ve got to have pride in yourself, your truck
and your equipment,” he says. “If you don’t have pride you don’t have anything
else.”

Rick Linneman goes for a ride on his Paint Horse.
Linneman rides his 13-year-old Paint Horse gelding, “Jake.”

Though he’s at an age when most people want to retire, Linneman
doesn’t foresee permanently parking his truck anytime soon. However, he does
make it home a little more frequently than the six to nine weeks he used to
spend on the road. He enjoys watching his grandkids ride their horses and
spending time with his wife of 11 months, Zane. The newlyweds recently
purchased a home in Gillette, where Linneman’s vast collection of Western art and
gear is on display like in a gallery or museum. There are paintings by Maria
D’Angelo and Bill Owen, bronzes by Steven Lee and Jason Skull, the only saddle
made by Mehl Lawson, and spade bits, hackamores and California-style gear
galore.

“[My collection] is something I treasure and value in my
heart, something I want to pass along to my grandkids,” Linneman says of his
collection. “It reminds me of the wonderful people I’ve met and the [carving
and engraving on the gear] flow like the lines of the highway and in life. They
go up and in circles, but they’re constantly flowing.”


Credit: Source link

LEAVE A REPLY

Please enter your comment!
Please enter your name here